Vol. 29 No. 1 (2021): Metal and Casting of Ukraine

Articles

• Structure of the cast composite material for system [Al – FeCr], obtained by application of dispersonally filled gasifying model

  I. A. Nebozhak, O. V. Derev’yanko

  • PDF (Ukrainian)

• Forced heat exchange and cooling rate of drops at producing metal powders by melt water atomization

  Yu. F. Ternovyi, Adel Prigunova, V. O. Panova

  • PDF (Ukrainian)

• Investigation of the microstructure and hardness of experimental rail steels in the cast state, after hot plastic deformation and heat treatment

  Oleksandr Babachenko, Hanna Kononenko, Rostyslav Podolskyi, Olena Safronova

  • PDF (Ukrainian)

• Oxidation resistance of aluminum chromium steels in agressive environments

  Mykhail Yamshynskyi, G. Ye. Fedorov

  • PDF (Ukrainian)

• Study of the structure of a resource-saving alloying alloy containing Fe, Ni, Cr, W, Mo, Nb, Ti obtained of technogenic waste for improving the life safety

  Oleksiy Smirnov, Artem Petryshchev

  • PDF (Ukrainian)

• Manufacture of foundry forms by steam-microwave hardening by models from frozen sandwater mixtures

  L. I. Solonenko, Sergii Repyakh

  • PDF (Ukrainian)

• Technology of thin-walled ductile cast iron castings obtaining in coated metal moulds with the use of in-mold melt modifying

  Valentyn Bublikov, Anatoliy Narivskyi, Yu. D. Bachynskyi

  • PDF (Ukrainian)

• Improving the efficiency of lime firing in a rotary kiln using wood powder as fuel

  S. G. Polozhaj, S. V. Mazur, S. V. Muzychuk, I. M. Raykovsky

  • PDF (Ukrainian)

• Current aspects of hydrogen and oxygen content in aluminum alloys

  Vitaly Gnatush, Mykhailo Voron

  • PDF (Ukrainian)

• Processing plasticity of metal of nondeformed continuously cast tube billets

  Liudmyla Opryshko, Tetiana Golovniak

  • PDF

• Investigation of hardening processes of core mixtures with phosphate binders, including for additive sand molding

  Rostyslav Liutyi, Volodymyr Дорошенко, Mariia Tyshkovets

  • PDF (Ukrainian)

• Physical modeling of traffic behavior and formation of stagnant zones in a single-line tundish during casting in the conditions of a metallurgical micro-mill

  Oleksiy Smirnov, Aleksei Verzilov, A. V. Kravchenko, Yurii Smirnov, Anastasiia Semenko, Danil Hoida

  • PDF (Ukrainian)